12
5.3 Radio reception
• Ensure that the LOCK-switch is off.
• Press POWER to switch the radio on.
• The frequency and the wave band will appear on the display.
• Adjust the volume with the VOLUME control.
• You can connect headphones to the socket
• The loudspeaker will then be switched off.
• Set the wave range with the FM MW SW1 SW2 switch
• If you select SW with the FM MW SW1 SW2 switch, press
METER to select the enquired meter band of short wave.
• The chosen short-wave band and the frequency will appear on
the display.
• Tune to a radio station either manually, automatically, directly
or with the PRESET buttons.
MONO/STEREO
• When appears on the display, you are receiving an FM stereo
transmitter. If you are listening with headphones, you will
hear the FM station in stereo.
• A disturbing noise, due to a weak FM stereo signal, can be
suppressed by setting MONO/STEREO to MONO.
• The indication goes out and you will hear the FM station in
mono.
• Press POWER once again to switch the radio off.
• The display will now indicate the current time.
Comments to this Manuals