Eton E1 User Manual download pdf (Page 26)

Program ON/OFF timers (starting 53)

• Press MENU to activate MAIN MENU

• Press ‘5' to activate TIMERS menu.

• Press ‘1' and set TIMER 1 ON time using Keypad.

• Press ‘STORE’ to save.

• Press ‘2' and set TIMER 1 OFF time using keypad.

• Press ‘STORE’ to save.

• Press ‘3' and set TIMER 1 Memory Channel using key-

pad and press ‘STORE’ to save.

• Repeat for TIMER 2 using menu entries 4, 5, and 6.

• Press ‘9' to exit menu.

Activate (Enabling) Timer (page 56)

• Press ‘TIME’ to activate TIMER 1 menu.

• Press ‘ENABLE‘ to activate.

• Press ‘TIME’ again to activate TIMER 2 menu.

• Press ‘ENABLE’ to activate.

• Press ‘TIME’ again twice to return to normal operation.

• TIMER 1 and/or 2 will be displayed below the clock to

indicate activation.

Lock (or Unlock) Controls (page 56)

• Press and hold ‘CLR/LOCK’ until “LOCK” is displayed

(extinguishes).

• Pushbuttons (except POWER) and ‘TUNING’ knob are

inactive (active).

Display light On/Off (page 57)

• Press ‘LIGHT’ to scroll display lighting through bright,

medium, dim and off.

Disable Beep (page 25)

• Press ‘MENU’ to enable MAIN MENU.

• Press ‘2' to enable the AUDIO SETTINGS menu.

• Press ‘2' to toggle Beep on and off.

• Press ‘9' to exit menu.

MEMORY FUNCTIONS

• Store MEMORY Channel (page 26)

• Store COUNTRY Channel (page 28)

• Select frequency, bandwidth,AGC and mode.

• Press ‘STORE’. This will activate MEMORY or COUNTRY

memory mode.

• Press MEMORY or COUNTRY to select your preference.

• Select an empty location using ‘TUNING’ or ‘< SELECT >’.

• Press ‘STORE’ to save.

• If in MEMORY mode, use ‘TUNING’ and ‘< SELECT >’ to

assign name, and press STORE again.

• Recall MEMORY Channel (page 26)

• Recall COUNTRY Channel (page 28)

• Press ‘MEMORY’ or ‘COUNTRY’.

• Use ‘TUNING’ and/or ‘< SELECT >’ to select desired

memory channel.

Select MEMORY or COUNTRY Channel

for T.SCAN (page 51)

• Recall a MEMORY or COUNTRY channel as above.

• Press ‘TAG’ to mark the channel for T.SCAN.

• Set SQUELCH to desired level.

• Press ‘T.SCAN’ to activate scan.

• Delete a MEMORY Channel (page 28)

• Delete a COUNTRY Channel (page 30)

• ‘Select a MEMORY or COUNTRY channel to delete as

described above.

• Press and hold ‘DELETE’ for 3 seconds. A high pitched

beep will be heard and listed channel will be deleted.

Quick Reference Guide continued > > >

48 49

1 MANUAL

QUICK REFERENCE GUIDE continued

QUICK REFERENCE GUIDE

The symbol indicates that the key is to be

pressed within three seconds.

Select normal frequency display (VFO) (page 19 item 20)

• Press ‘VFO’

Select normal frequency display (VFO) (page 19 item 21,

22, 23)

• Press ‘FM’, SW, MW or LW softkeys to select FM

Broadcast, Shortwave,AM Broadcast or Long Wave

bands.When in Shortwave mode, press ‘SW’ two or

three digit entry from ‘Direct-Key-Input’ keypad for

Shortwave Meter band designation.

Adjust Frequency (page 21)

• Select Band. Turn ‘TUNING’ knob, Press ‘< SELECT >’

keys, use ‘Direct-Key-Entry’ keypad.

Select Mode (page 22-25)

• Press ‘AM’ for displayed ‘AM’

• Press ‘AM’ again to toggle to ‘AM SYNCH’

• Press ‘SSB’ to scroll between ‘USB’, ‘LSB’ and DSB

when ‘AM SYNCH’ is displayed.

• Press ‘FM’ as required to display ‘FM’.

• Press ‘SSB’ to select SSB mode. (AM SYNC must be

off. To turn off, press AM).

Select AM SYNC (page 23)

• With unit in ‘AM’ mode, press ‘AM’ again. ‘AM SYNC’

will flash and then lock on.

Select Bandwidth (page 19, item 13)

• Press ‘BW’ for displayed ‘7.0', ‘4.0' or ‘2.3' kHz (not

active in FM).

Select AGC (page 19, item 12)

• Press ‘AGC’ for displayed ‘SLOW’, ‘FAST’, or AUTO (not

active in FM).

DX (preamplifier) On or Off (page 15 item 16)

• Press ‘DX’ for displayed ‘DX’ or blank.

Set Time (page 52)

• Press ‘MENU’ to display MAIN MENU.Then press ‘3’ to

display SET CLOCKS display.

• Press ‘1', set Local time using keypad, and press

STORE to start clock.

• Press ‘2', set GMT time using keypad and press

‘STORE’ to start clock.

• Press ‘9' to exit SET CLOCKS display

Display GMT or Local Time (page 48)

• Press ‘TIME’ key 3 times.

• Press GMT or LOCAL softkey to select.

• Press ‘TIME’ key again to exit menu.

• Time is always displayed in upper right corner when

on, and in center of display when off.

Quick Reference Guide continued > > >

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comments to this Manuals

No comments

Eton E1 User Manual Page 26

Comments to this Manuals

Related products and manuals for Cars Eton E1