Eton YB550PEO User Manual download pdf (Page 15)

USING SHORTWAVE continued

6 CLOCK AND ALARM FEATURES

AUTOSCAN TUNING WHILE IN SHORTWAVE

In shortwave, autoscan tuning only autoscans in the short-

wave frequency ranges noted below in the SHORTWAVE

BAND CHART OF AUTOSCANNING RANGES. To tune short-

wave frequencies that are in-between these ranges, or out-

side of these ranges, use one of the other tuning methods.

SHORTWAVE BAND CHART

OF AUTOSCANING RANGES

BAND (meters} FREQUENCY RANGE (kilohertz)

120 2250 - 2550

90 3150 - 3450

75 3850 - 4050

60 4700 - 5100

49 5800 - 6300

41 7100 - 7500

31 9400 - 1000

25 11500 - 12150

22 13500 - 13900

19 15000 - 15900

16 17450 - 18000

15 18850 - 19100

13 21450 - 21950

11 25600 - 26100

YB 550PE OPERATION MANUAL

SETTING THE CLOCK

The factory default has set the clock to function as a 24 hour

format clock. If you prefer a 12 hour, AM/PM clock format,

see the section titled CHANGING THE CLOCK FORMAT, on

page 39.

To set the clock:

1. Turn the radio off. The clock digits appear in the lower

portion of the display (28).

2. Press/release the button labeled ‘Time Set’ (5). The clock’s

digits flash in the display.

3. Within 5 seconds, set the hour using the + button and the

minutes using the – button. Make sure that AM or PM

(29) appear in the display appropriately for the time of

day if your clock is set up in the 12 hr. AM/PM format.

4. Within 5 seconds of finishing, press/release the ‘Time Set’

button twice.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 127 128

No comments

Eton YB550PEO User Manual Page 15