Eton FR370 Owner's Manual download pdf (Page 9)

SOLARLINKFR370 OWNER’S MANUAL

ACTIVATING AND DEACTIVATING

THE ALARM TIME

Press <ON/OFF/ALARM> button shortly to activate or deactivate the alarm.

If the alarm function is activated, the symbol “

“ will be on the display.

When the alarm time is reached, the unit will beep. If the alarm function

is deactivated, the alarm symbol “

“ will disappear.

A M 0 8

ALL COUNTY

SNOOZE FUNCTION

When the alarm activates, press <SNOOZE> button shortly deactivates it

for 5 minuetes (the symbol “

“ will appear in the display), then it starts

to beep again.

AM/FM BROADCAST RECEPTION

Turn on the radio. Press the AM/FM button, AM or FM will appear on the

display with the frequency to the right of it, in KHz for AM and in MHz for

FM. Press the

buttons quickly to tune individual frequencies, hold to

tune automatically to the next frequency. Pull up the telescopic antenna to

hear FM frequencies.

The AM ferrite bar antenna is built-in to the radio, so no telescopic antenna

is needed for AM reception.

• FM tuning range: 87.5 to 108 MHz.

• AM tuning range: 520 to 1710 KHz.

RECEPTION OF NOAA

WEATHER BAND FREQUENCIES

To hear your local weather station, pull up the antenna, turn on the radio

and press the WB button located above the display. Turn up the volume and

press the

buttons to go through all 7 weather channels. WB and CH

appear at the top of the display, with 1-7 next to CH. You’ll probably only

hear one channel, but if you hear a weather broadcast on more than one,

select the strongest. The strongest one will usually be your local weather

station. Below are the frequencies that correspond to the radio’s channels:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

No comments

Eton FR370 Owner's Manual Page 9